Very high-quality noble fountain pen in oak (oak from the bog) and ebony with a polished pen (writing tip) in font width b (width). You get a particularly high-quality, noble and precisely processed screw fountain pen with clip. The parts made of wood are finished with wax and shellac.
This gives the surface a silky shine, good resistance to sweat and a pleasant feel in use. With this fountain pen, the cap and shaft is made of oak (oak from the bog), the handle is made of stainless steel, the clip holder is turned out of ebony. The grain runs through the cap and shaft.
It is a pen of the company bock from heidelberg installed. The cap holds on the handle via a head thread.
So turn the cap off the fountain pen, or return them to the fountain pen with light pressure. Oak from the bog means that the oak wood is "only" located in the moor for about 100 years and has thus taken on the dark color. Comparable to a smoked oak.
Real moorland should be in the moor for at least 1000 years. Therefore, here is only the name "oak from the moor". Please clean the fountain pen gently and without pressure with a soft cloth. Do not use any other detergents.
This can damage the surface. To fill the fountain pen with ink, turn the handle from the shaft (right thread) counterclockwise.
Insert either a standard cartridge or an ink converter onto the handle with moderate pressure until the cartridge is open and the ink can flow. You can store a second spare cartridge with the narrow side first in the shaft and then screw the handle back onto the shaft.
The fountain pen comes with 2 standard cartridges (in royal blue) and an ink converter (for self-filling). A separate inkwell is not included. All wood components and metal parts of the fountain pen, as well as the pen are made in germany. The fountain pen has the following dimensions.
Diameter shaft (ds) 15 mm. Stroke weight of the spring: b (wide). Ink holder: 2 standard cartridges or an ink converter (maximum 75 mm length).